Skip to content

Tag: Dell EMC Networking

Dell EMC 0

Dell EMC Networking – Configuring Layer-2 Mode

Switch model: S4048-ON Code Version: 9.10(0.1) 48 Ten GigabitEthernet/IEEE 802.3 interface(s)6 Forty GigabitEthernet/IEEE 802.3 interface(s) Brief detail in relation to setting Layer-2 switchport mode on all 48x10GbE ethernet interfaces to support L2 VLAN based networking: cork-vxrail1-tor#conf tcork-vxrail1-tor(conf)#interface range tengigabitethernet 1/1-1/48cork-vxrail1-tor(conf-if-range-te-1/1-1/48)#switchportcork-vxrail1-tor(conf-if-range-te-1/1-1/48)#no shutcork-vxrail1-tor(conf-if-range-te-1/1-1/48)#exitcork-vxrail1-tor(conf)#exitcork-vxrail1-tor# To revert to non switchport mode: cork-vxrail1-tor#conf tcork-vxrail1-tor(conf)#interface range tengigabitethernet 1/1-1/48cork-vxrail1-tor(conf-if-range-te-1/1-1/48)#no switchportcork-vxrail1-tor(conf-if-range-te-1/1-1/48)#exitcork-vxrail1-tor(conf)#exitcork-vxrail1-tor#

By David Ring Posted on

Dell EMC 0

Dell EMC Networking – Configuring MTU

Switch model: S4048-ON Code Version: 9.10(0.1) 48 Ten GigabitEthernet/IEEE 802.3 interface(s)6 Forty GigabitEthernet/IEEE 802.3 interface(s) Brief detail in relation to setting an MTU (Maximum Transmission Unit) value on all 48x10GbE ethernet interfaces to support Jumbo Frames: cork-vxrail1-tor#conf tcork-vxrail1-tor(conf)#interface range tengigabitethernet 1/1-1/48cork-vxrail1-tor(conf-if-range-te-1/1-1/48)#mtu 9216cork-vxrail1-tor(conf-if-range-te-1/1-1/48)#exitcork-vxrail1-tor(conf)#exitcork-vxrail1-tor#show interfaces tengigabitethernet 1/1 | grep MTUMTU 9216 bytes, IP MTU 9198 bytescork-vxrail1-tor# To revert to default MTU value […]

By David Ring Posted on